Single use homogenizer for soft samples up to 6ml
- Single use disposable
- Minimum package: 48 units/box
- Works with FASTH21 or Medimachine II
- It works between 1ml & 5ml of total volume (sample + solvent)
Samples :
- Lymph nodes & similar
Single use homogenizer for soft samples up to 6ml
Samples :
Disposable disaggregator with 50µm separator screen
The Medicon Max is a disposable disaggregator with 50µm separator screens. Like the Medicon it has a high-density polyethylene casing and can be sterile and non-sterile.
The stainless steel inner is made up of a fixed screen with about 250 hexagonal bore-holes, around each of which there are 6 microblades. It requires a 16 ml liquid solution.
Disposable filter for separating cells and nuclei
The Filcons-Max, a disposable filter for separating cells and nuclei, has a porous membrane with an effective surface area of 660 mm2, enabling larger quantities of cell suspensions to be filtered than with the Filcons.
The microporous polyethylene funnel section is designed to pass the biological material to be retrieved while trapping waste particles over 1.5μm in size.
Filcons-Max are only available as cup-type. They fit perfectly to 50 ml tubes. All packages contain 100 units. Non-sterile Filcon-Max are packed in 20 units/bag, sterile Filcon-Max are packed 1 unit/blister.
Single use homogenizer for soft samples up to 6 ml
Samples :
Single use homogenizer for samples up to 25 ml.
Samples :
Disposable filter for separating cells and nuclei
Filcons are disposable filters for separating cells and nuclei. The porous membrane enables large quantities of cell suspensions to be filtered. The microporous polyethylene funnel is designed to pass the biological material while trapping waste particles.
There are two types of Filcons: a syringe-fitting form that can be used with either suction or compression, which works well for quantities over 5 mL, and a cup type that works well for lesser quantities.
Disposable disaggregator available with 35µm or 50µm separator screens
This disposable disaggregator is available with 35µm or 50µm separator screens. It has a high-density polyethylene casing and can be sterile and non-sterile. The internal mechanical part is in stainless steel and is made up of a fixed screen with about 100 hexagonal bore-holes, around each of which there are 6 microblades. It requires a 1 ml liquid solution.